Matters needing attention in the production of injection molds

1. All kinds of screw holes are accurate, the number of holes and screw locking are complete; Whether the countersunk depth of each punch on the back of the splint reaches the punch depth; mould supplier ，Whether the top of each mold is ground and chamfered on the front;

2. Whether the relevant matching dimensions of each step are completely correct; Pay attention to whether the R angle of various bending dies is smooth and polished; Whether each template is deburred with a whetstone; During the manufacturing process, special attention should be paid to the height of the template;

3. Check the drawings to see if the avoidance inside the mold is complete; pay attention to whether the depth of the spring hole reaches the standard compression ratio; check whether the blanking hole is completely avoided;

like：

How to control the color difference of plastic mold products

How to prevent plastic mold occlusion 

Important points to pay attention to in the production of plastic molds