Wire Mesh and rebar are roughly the same strength ; 55,000 psi yield ( both are available in various grades ).
Soon after placing the wire mesh, you have to tie the sheets all at once. With the help of Linesman pliers, you have to tie the corners and tie the centre of the overlapping sheets as well. Way ahead, you need to be sure that the ties have brought two sheets closer.
Rebar is not necessary for every concrete project. The general rule of thumb is that if you are pouring concrete that is more than 5 inches in depth, you are probably going to want to add in some rebar to help reinforce the entire structure.
Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.
Reinforcing Concrete Reinforce a concrete pour with rebar or steel mesh. Rebar is the most common addition for strengthening the pour. In vertical or horizontal projects, the more rebar present in the concrete, the stronger the finished project will be.
In the world of woven wire mesh, there are four main welding techniques used to affix mesh: Spot/Resistance welding, Tungsten Inert Gas (TIG) welding, Plasma Welding, and Soldering.
Wire mesh comes in a variety of metals, all of which can be welded and soldered to form various components and assemblies.
Terminology: Opaque - no light can pass through the mineral; Translucent - light can pass through the mineral but is diffused so that images cannot be seen clearly; Transparent - light can pass through the mineral and images can be seen clearly.
Transparent: Air, water, a sheet of plane glass. Translucent: A sheet of polythene, smoke, fog, a sheet of cellophane, a wire mesh.
Chicken wire or wire mesh can be safely used as a reinforcement in concrete when the concrete is not used in structural or high-weight areas. The wire mesh or chicken wire can add stretching strength that concrete does not have, giving the concrete rigidity when facing specific pressures.