Printed Solid is your USA exclusive authorized Original Prusa reseller for Education and Government sales. We are proud to be the exclusive authorized reseller in the USA for Original Prusa printers, materials and supplies in the educational and government sector.
The Prusa i3 MK2 is an excellent 3D printer for people who want to start with 3D printing. It is most suited towards beginners as it is very user-friendly, but at the same time offers some advanced features as well. All in all, the Prusa i3 MK2 is an excellent choice for anyone looking to get into 3D printing.
Prusa3d.comPrintable parts are divided into two groups: Complete kits - which contain a full set of plastic parts for the entire 3D printer.
What is stereolithography (SLA) prototyping? Stereolithography apparatus (SLA) produces 3D printed parts by curing photopolymer resins with light. It is more accurate and produces smoother surfaces than some other 3D printing technologies, yet it is quick.
Although there is no set time frame for changing or replacing your nozzle, we recommend that you do so every 3-6 months. Replacement time is very dependent on how frequently you use your 3D printer, the type of filaments you use, and the quality of your nozzle.
PLA and ABS are both thermoplastics. PLA is stronger and stiffer than ABS, but poor heat-resistance properties means PLA is mostly a hobbyist material. ABS is weaker and less rigid, but also tougher and lighter, making it a better plastic for prototyping applications.
Most 3D printers on the market utilize the standard 0.4 millimeter printing nozzle and use a default setting of 0.2 millimeter layer height. This combination follows a rule of thumb where your layer height is half the size of the nozzle you print with.
If they're not sticking well, you may want to increase the temperature up a little. A warmer bed helps to soften the plastic, allowing it to stick. Just be careful not to heat up your bed too much, otherwise your prints might end up with elephant's foot (as seen in the photo).
If your print bed is too hot, you're most likely to face issues with the bottom of your print, such as Elephant's foot. This is where the bottom of a print gets squeezed out under the weight of the rest of the print as it is too hot and runny.
With Z-Hop turned off, you can prevent stringing, and your print will be ready faster since the nozzle does not need to retract and hop every time you have open space.
