由 glyceridaquar博客 於 2022-09-02 19:59:39 發表 | 累積瀏覽 176
5-axis machining refers to the use of a computer numerical control (CNC) to simultaneously move cutting tools or parts along five axes. The cutting tool continuously moves along every axis so that the tip is always perpendicular to the part. This process allows you to machine a variety of complicated parts.
Operating along the XYZ planes, the X axis operates vertically while the Y axis operates horizontally, and Z is the depth direction. Z axis is the CNC lathe axis which is aligned with the main axis of the machining centers.
They're known as mill-turn lathes, and sometimes multitasking machines—whatever you call them, these ultra-complex, twin-spindle, dual-turret, automatic tool-changing, do-everything CNC lathes are surely the most-efficient way to produce a wide variety of complex machined parts.
They are Latin abbreviations: OS (oculus sinister) means the left eye and OD (oculus dextrus) means the right eye. Occasionally, you will see a notation for OU, which means something involving both eyes.
5-axis machining refers to a machine's ability to move a tool or a part in five different axes simultaneously. Basic machining operates on three primary axes, X,Y, and Z; however, a 5-axis CNC machining tool can rotate two additional axes, A and B, which give the cutting tool a multidirectional approach.
CNC turning is a manufacturing process that involves holding bars of material in a chuck and rotating them while feeding a tool to the piece to remove material until the desired shape is achieved. As the desired shape is achieved through the removal of material, it is also known as subtraction machining.
X-axis allows movement “left” and “right” Y-axis allows movement “forward” and “backward” Z-axis allows movement “up” and “down”
Uses: CNC milling is better suited for machining flat and irregular surfaces, while CNC turning is mainly used for working on cylindrical or conical surfaces. Cutting: CNC turning involves continuous cutting, with the tool maintaining constant contact with the workpiece.
It is taught that the Z axis is referencing the vertical axis which is the center of rotation referred to as the axial plane. Figure 3 This denotes the rotational axis of a CNC machine. This does not however denote a moniker of X, Y or Z. The direction of the thumb is referencing axial plane.
The device, which is referred to as a C-axis lathe, is a CNC-based lathe with an electronic part. C Axis Lathe Features. In addition to the C-axis, they are also machines with X and Z axes for three-dimensional operation. The C axis can be provided with angles of 0, 30, 60 and 90 degrees.
